DESPAIR-LAB Mouth Position Trigger System 1.0 (DUNGEON-LAB Version)

This is a device that detects the angle of mouth opening. The device can be compatible with 80% of the electric shock machines on the market. The equipment angle is fixed, and the opening distance is 4 cm. When the device detects that the mouth opening angle is less than the set value, it will trigger the electric shock main unit to start.

Introduction to Device Interfaces

The host uses Type-C power supply, the transmitter connects to the head-mounted device via a 3.5mm interface, and the receiver connects to the electric shock host via a 2.5mm interface. The transmitter's buzzer is enabled by default and can be turned off with a small switch on the transmitter.

DUNGEON-LAB version

This design is a special edition for DUNGEON-LAB, so the receiving end can seamlessly integrate with the rest of devices. We have also reserved a fixed position for the elastic strap, allowing the device to be worn on the body using the strap, such as on the thigh, arm, waist, etc.

Size Introduction

The device comes in four sizes: 16/17/18/19 cm. Please make sure to measure your face width accurately before placing an order to avoid size mismatches. Our products are made using 3D printing technology with PLA material, which is safe, non-toxic, and high-quality. Please use with confidence.

Because 3D printing materials are prone to defects due to environmental factors, the printer settings are continuously adjusted.

Usage reminder

Please adjust the shock host to the low setting before use to avoid danger. This product is intended for use by individuals aged 18 and over. Use the product in a legal, voluntary, and safe environment. Clean the product promptly after use and store it in a place away from direct sunlight.